Trim Molding, Audi S5

Trim Molding, Audi S5

Removing






- Remove the lower section of the bumper cover. Refer to => [ Bumper Cover Lower Section ] Bumper Cover Lower Section.

- Remove the bolts - arrows -.

- Remove the trim molding - 1 - forward from lower section of the bumper cover - 2 -.

Installation

• Tightening specifications. Refer to => [ Rear Bumper Cover Overview ] Rear Bumper Cover Overview.

Installation is reverse of removal, but note the following:

- Install the lower section of the bumper cover. Refer to => [ Bumper Cover Lower Section ] Bumper Cover Lower Section.