Lock Carrier with Attachments Assembly Overview

Lock Carrier with Attachments Assembly Overview






1 Bolt

• 30 Nm

• 3 pieces per side.

2 Side Impact Bar

• Secured to the lock carried with the bolt - 3 -.

• Do not remove with the bracket when removing the lock carrier.

3 Bolt

• 4 Nm

• Secures the impact bar to the lock carrier.

4 Lock Carrier

• The coolant for the water cooler must be drained before removing.

• Removing

• Remove the lock carrier cover.

- Remove front bumper. Refer to => [ Front Bumper Cover ] Front Bumper Cover.

- Disconnect all electrical wires and hoses to the lock carrier at the connection points.

- Disconnect hood lock cable at coupling. Refer to => [ Hood Lock Release Cable ] Hood Lock Release Cable.

- Remove the bolts - 5 -.

- Remove the bolts - 1 - on the longitudinal member (Qty. 3 per side).

• The impact absorbers with the brackets are secured to the lock carrier with one bolt each - 1 - and must not be removed.

- Remove the bolts - 6 - on the lower lock carrier.

- Remove the lock carrier with the headlamps forward.

• Installing in reverse order

• Adjust the headlamps after installing.

5 Bolt

• 10 Nm

6 Bolt

• 1.5 Nm

7 Fenders

Removing the lock carrier cover





1 Cover

• To remove, remove the locking pin and release the expanding clip.

• Remove the expanding clip from the cover.

• Remove the cover back from the radiator grille.

• When installing, the tabs on the cover must engage on the radiator grille and on the sides of the bumper cover.

• Insert the expanding clip through the cover into the lock carrier and press the locking pin in.

2 Spreader Clip

• Remove the clamping pin when removing.

• Only press the clamping pin in when installing.

• Qty. 4

3 Lock Carrier

4 Radiator Grille

Lock carrier brace





1 Bolt

• 1.5 Nm

2 Left Lock Carrier Brace

• Attached to the mounting bracket with the nut - 6 -.

3 Lock Carrier

4 Spring Nut

• Slide into the lower lock carrier.

5 Subframe

6 Nut

• 23 Nm