Exterior Moulding / Trim: Description and Operation

Moldings and Trim Assembly Overview

• The vehicle must reach room temperature before installing bonded moldings or trim.

• All adhesion surfaces must be free of dust and grease.






1 Clip

• For attaching the stone chip protective molding

2 Right Stone Chip Protective Molding

• Removing and Installing, refer to => [ Stone Chip Protective Molding ] Stone Chip Protective Molding

3 Right Sill Panel

• Removing and Installing, refer to => [ Sill Panel Trim ] Sill Panel Trim

4 Nut

• Qty. 11

• 2.5 Nm

5 Convertible Top Compartment Cover Trim Molding

• Removing and Installing, refer to => [ Convertible Top Compartment Cover Trim Molding ] Convertible Top Compartment Cover Trim Molding

6 Left Sill Panel

• Removing and Installing, refer to => [ Sill Panel Trim ] Sill Panel Trim

7 Clip

• For attaching the stone chip protective molding

8 Left Stone Chip Protective Molding

• Removing and Installing, refer to => [ Stone Chip Protective Molding ] Stone Chip Protective Molding