Interior Rearview Mirror

Automatic Dimming Interior Rearview Mirror Y7, Setting

It is necessary to set when:

• A new automatic day/night interior mirror (Y7) is installed.

• In the newer automatic day/night interior rearview mirrors (Y7) , the zone sensor has been moved from the mirror base to the mirror housing. The steering side "must" only be set with these mirrors.

• To recognize the new automatic day/night interior mirror (Y7) , press the button - 2 - longer than 12 seconds; an "L" or an "A" will appear.






- Press the button - 2 - 12 to 15 seconds until "L - for LHD" or "A - for RHD" appears.

- Press the button again; the drive side will be changed.

- The display switches automatically after a short time to "C" - for calibration. The digital compass must now be calibrated. Refer to => [ Digital Compass, Calibrating ] Digital Compass, Calibrating.

- The interior rearview mirror automatic dimming function is reactivated after the calibration is complete. Refer to => [ Automatic-Dimming Function, Switching On and Off ] Automatic-Dimming Function, Switching On and Off.