Manual Sport Seat Assembly Overview

Manual Sport Seat Assembly Overview

• The overview is based on the driver seat. The passenger seat is similar and the components are installed reversed from left to right.

• The illustration does not show the floor covering.





1 Connector station

• Connector routing, refer to => [ Connector Station Connectors ] Connector Station Connectors

2 Cover

• for the connector station

• Removing and Installing, refer to => [ Connectors, Disconnecting and Connecting ] Connectors, Disconnecting and Connecting

3 Electrical connection

• with a corrugated tube for the modular wiring routing

• Modular wiring routing, assembly overview, refer to => [ Modular Wiring Routing Assembly Overview ] Modular Wiring Routing Assembly Overview

• Modular wiring routing with corrugated pipe on front seat, refer to => [ Modular Wiring Routing with Corrugated Tube on Front Seat ] Modular Wiring Routing with Corrugated Tube on Front Seat

4 Seat angle adjustment

• Removing and Installing, refer to => [ Seat Angle Adjuster ] Seat Angle Adjuster

5 Storage compartment

• Special equipment

• Removing and Installing, refer to => [ Storage Compartment ] Storage Compartment

6 Seat forward/back adjuster

• seat forward/back adjustment handle, removing and installing, refer to => [ Seat Forward/Back Adjustment Handle ] Seat Forward/Back Adjustment Handle

• seat forward/back adjuster release cable, removing and installing, refer to => [ Seat Forward/Back Adjuster Release Cable ] Seat Forward/Back Adjuster Release Cable

7 Spindle cover

• Quantity: 2

• clipped to the seat forward/back adjustment spindle

• Removing and Installing, refer to => [ Seat Rail Spindle Cover ] Seat Rail Spindle Cover

8 Seat cushion extension

• Removing and Installing, refer to => [ Seat Cushion Extension ] Seat Cushion Extension

9 LATCH child seat anchor

• Special equipment

• for the front passenger seat only

• Removing and Installing, refer to => [ LATCH Child Seat Anchor ] LATCH Child Seat Anchor

• check after accident => [ Child Seat Anchorages, Checking after an Accident ]

10 Belt latch

• Removing and Installing, refer to => [ Front Belt Latch ] Front Belt Latch

11 Tunnel side trim

• Removing and Installing, refer to => [ Trim, Tunnel Side ] Trim, Tunnel Side

12 Manual sport front seat

• There is no separation between the upper and lower seat pan frame on the front seat - Sport seat (manual).

• Removing and Installing, refer to => [ Manual Standard Front Seats ] Manual Standard Front Seats

Optional equipment:

• Seat and backrest heating

• Cabin heater

13 Headrest

• Manual

• Removing and Installing, refer to => [ Headrests with Locking Mechanism ] Headrests with Locking Mechanism

14 Entry assistance

• Assembly overview, refer to => [ Entry Assist Backrest Release Assembly Overview ] Entry Assist Backrest Release Assembly Overview

• Removing and Installing, refer to => [ Entry Assistance Handle with Bracket ] Entry Assistance Handle with Bracket

15 Backrest adjustment wheel

• Removing and Installing, refer to => [ Backrest Adjustment Wheel ] Backrest Adjustment Wheel

16 Sill side trim panel

• Removing and Installing, refer to => [ Trim, Sill Side ] Trim, Sill Side

17 Cover

• Only behind on the seat rail, sill side

• Removing and Installing, refer to => [ Seat Rail Cap ] Seat Rail Cap

18 Bolt

• Quantity: 4

• 50 Nm

19 Cover

• For the seat rail

• Quantity: 4

• Removing and Installing, refer to => [ Seat Rail Cover ] Seat Rail Cover

20 Seat height adjustment unit

• Removing and Installing, refer to => [ Seat Height Adjustment Unit ] Seat Height Adjustment Unit

21 Actuator

• For the lumbar support

• Lumbar Support Adjustment Switch, Removing and Installing, refer to => [ Lumbar Support Adjustment Switch ] Lumbar Support Adjustment Switch

• Four-way lumbar support, removing and installing, refer to => [ Four-Way Lumbar Support ] Four-Way Lumbar Support