Seat Angle Adjuster Assembly Overview

Seat Angle Adjuster Assembly Overview






1 Handle

• For seat inclination adjustment

• Removing and Installing, refer to => [ Seat Angle Adjustment Handle ] Seat Angle Adjustment Handle

2 Retaining clip

• Replace the seat angle adjustment handle each time it is removed

• Installation position, refer to => [ The springs (quantity:
2) on the clip must be on the inner side of the lever. ] Seat Angle Adjustment Handle

3 Bolt

• Self-locking

• Replace after each disassembly

• Threaded hole for screws must be cleaned, for example, with thread cutter

• 6.5 Nm

4 Shoulder pin

• Self-locking

• Replace after each disassembly

• Threaded hole for shoulder pin must be cleaned, for example, with thread cutter

• 6 Nm

5 Seat angle adjustment

• Removing and Installing, refer to => [ Seat Angle Adjuster ] Seat Angle Adjuster