Backrest Assembly Overview

Backrest Assembly Overview






1 Seat pan

2 Screws

• Self-locking

• Replace after each disassembly

• Threaded holes for screws must be cleaned, for example, with thread cutter

• 33 Nm

3 Backrest

• Removing and Installing, refer to => [ Backrest ] Backrest

4 Headrest

• Removing and Installing, refer to => [ Headrests with Locking Mechanism ] Headrests with Locking Mechanism

5 Entry assistance, backrest release

• Assembly overview, refer to => [ Entry Assist Backrest Release Assembly Overview ] Entry Assist Backrest Release Assembly Overview

• Removing and Installing, refer to => [ Entry Assistance Handle with Bracket ] Entry Assistance Handle with Bracket

6 Entry assist trim

• Removing and Installing, refer to => [ Entry Assistance Trim ] Entry Assistance Trim

7 Wiring harness

• running from the side airbag to the connector station.

• depending on optional equipment, there may be more wiring harnesses, such as for the backrest heating, lumbar support

8 Release

• For seat forward/back adjustment

• Removing and Installing, refer to => [ Seat Forward/Back Adjuster Release Cable ] Seat Forward/Back Adjuster Release Cable

Tightening specification, retaining plate for the DVD player





- Tighten the retaining plate screws - 1 - to 6 Nm.

Tightening specification, DVD socket





- Tighten nut - 2 - to 0.4 Nm.