Power Headrests Assembly Overview

Power Headrests Assembly Overview

• The illustration does not show the backrest cover and upholstery.





1 Backrest

2 Headrest guide

• Without release button

• Removing and Installing, refer to => [ Headrest Guide ] Headrest Guide

• Always installed on the right side of the backrest

3 Wiring

• With connector

• Connected firmly to the headrest

4 Headrest

• Driver side:

• Driver Head Restraint Height Adjustment Sensor (G217)

• Driver headrest adjustment motor (V103)

• Passenger side:

• Front Passenger Head Restraint Height Adjustment Sensor (G282)

• Front passenger headrest adjustment motor (V104)

• Removing and Installing, refer to => [ Power Headrests ] Power Headrests

• With the headrest, the cover and upholstery can only be replaced with the entire base plate (including the adjuster).

• It is not possible to disassemble the base plate or replace the electrical and electronic components installed inside.

5 Headrest guide

• With release button

• Removing and Installing, refer to => [ Headrest Guide ] Headrest Guide

• Always installed on the left side of the backrest