Backrest Cover and Cushion Assembly Overview

Backrest Cover and Cushion Assembly Overview

• The assembly overview is based on a manual or power standard or Sport front seat and Comfort seat.





1 Retaining channel

• Sewn into cover

• For attaching the cover to the seat backrest frame

2 Tab

• With hooks

• Sewn into cover

• For attaching the cover to the seat backrest frame

3 Cover

• Cover with upholstery, removing and installing, refer to => [ Backrest Cover and Cushion ] Backrest Cover and Cushion

• Cover, Separating from Cushion and Connecting, refer to => [ Backrest Cover ] Backrest Cover

4 Contour wire

• Pushed into the cover

5 Cushion clamp

• For securing cover to upholstery

• Replace after each disassembly

• Install in same location as before removal

6 Wire

• In foam in upholstery

• For securing cover to upholstery

7 Backrest frame

8 Cushion

• Cover with upholstery, removing and installing, refer to => [ Backrest Cover and Cushion ] Backrest Cover and Cushion

• Cover, Separating from Cushion and Connecting, refer to => [ Backrest Cover ] Backrest Cover