Release Cable Mount Lever and Seat Forward/Back Adjustment Spring

Release Cable Mount Lever and Seat Forward/Back Adjustment Spring

Removing

• The work can be performed with the seat installed.

- Move the seat as far as possible up and back.

- Disengage the release cable bracket - 1 - from the seat forward/back adjustment - 2 -.






- Disengage the end of the release cable - arrow - at release cable retainer lever - 3 - of the seat forward/back adjuster.

- Turn the release cable retainer lever forward and remove it "key hole principle".

- Remove the spring if necessary.

Installing

Installation is performed in reverse order of removal, noting the following:

• The release cable retainer lever is the same for the driver and front passenger seat. The spring is different for the driver and front passenger seat.

- Install the spring correctly.

Release cable retainer with installed spring for the left seat:






- Attach the spring at points - 1 - and - 2 -.

- Turn the spring at lever - 3 - in a clockwise direction.

- Place the spring around tab - 4 - so that it is touching - 5 -.

Release cable retainer with installed spring for the right seat:






- Attach the spring at points - 1 - and - 2 -.

- Turn the spring at lever - 3 - in a counterclockwise direction.

- Place the spring around tab - 4 - so that it is touching - 5 -.