Seat Heating Element, Sport Seat

Seat Heating Element, Sport Seat

Removing





- Remove the seat pan cover and cushion. Refer to => [ Seat Pan with Seat Cushion Extension ] Seat Pan with Seat Cushion Extension.

- Cover, Separating from Upholstery, refer to => [ Seat Pan with Seat Cushion Extension Separating and Connecting ] Seat Pan with Seat Cushion Extension Separating and Connecting.

- Cut the electrical wire - 2 - off directly at the old heating element - 1 -.

• The old seat heating element remains on the upholstery - 3 - and the new seat heating element is bonded over it.

Installation

- Align the new heating element on upholstery.


• Make sure the new seat heating element is affixed to the old heating element.

• Remove the protective films in the bonding sequence for the heating element area.

• When removing the protective film, make sure the heating element is not damaged and that it is attached without wrinkles.

- Bond the seat heating element - 1 - in sequence - E, D, A and C -.





- Bond the bolsters areas - B -.

- Route the connecting wires to the individual heating surfaces in the base of the gaps - arrows -.

- Pull the wire - 2 - through the slit in the cushion - 3 -.

Further installation is performed in the reverse order of removal.