Seat Heating Element, Standard Seat

Seat Heating Element, Standard Seat

Removing





- Remove the seat pan cover and cushion. Refer to => [ Front Seat Pan without Seat Cushion Extension ] Front Seat Pan without Seat Cushion Extension.

- Cover, Separating from Upholstery, refer to => [ Seat Pan without Seat Cushion Extension Separating and Connecting ] Seat Pan without Seat Cushion Extension Separating and Connecting.

- Cut the electrical wire - 3 - off directly at the old heating element - 2 -.

• The old seat heating element remains on the upholstery - 1 - and the new seat heating element is bonded over it.

• Ignore - A through E - and - arrows -.

Installation

- Align the new heating element on upholstery.


• Make sure the new seat heating element is affixed to the old heating element.

• Remove the protective films in the bonding sequence for the heating element area.

• When removing the protective film, make sure the heating element is not damaged and that it is attached without wrinkles.

- Bond the individual areas of the seat heating element - 2 - in sequence - A, B, C and D -.





- Bond the bolsters areas - E -.

- Route the connecting wires to the individual heating surfaces in the base of the gaps - arrows -.

- Pull the wire - 3 - through the slit in the cushion - 1 -.

Further installation is performed in the reverse order of removal.