Seat Bench Heating Element

Seat Bench Heating Element

Removing





- Remove the seat bench cover and cushion. Refer to => [ Cover and Cushion, Seat Bench ] Cover and Cushion, Seat Bench.

- Cover, Separating from Upholstery, refer to => [ Seat Bench Cover, Separating from Upholstery ] Seat Bench Cover, Separating from Upholstery.

- Cut the electrical wire - 1 - off directly at the old seat bench heating element - 3 -.

• The old seat bench heating element remains on the upholstery - 2 - and the new seat bench heating element is bonded over it.

• Ignore the - arrows -.

Installation

- Align the new seat bench heating element on the upholstery.


• Make sure the new seat bench heating element is affixed to the old heating element.

• Remove the protective films in the bonding sequence for the heating element area.

• When removing the protective film, make sure the heating element is not damaged and that it is attached without wrinkles.

- Begin bonding in the center area - B - of the seat bench heating element - 3 -.





- Then bond the upper area - C -.

- Route the connecting wires to the individual heating surfaces in the base of the gaps - arrows - without crossing.

- Bon the rear area - A - of the heating surface.

- Pull the wire - 1 - through the slit in the cushion - 2 -.

Further installation is performed in the reverse order of removal.