Backrest Fan

Backrest Fan

Removing





- Remove the backrest cover. Refer to => [ Backrest Cover ] Backrest Cover.

- Adjust the lumbar support to the highest curve while moving the slider - 1 - all the way down - arrow A -.

• Ignore - 2 -.

- Disconnect electrical harness connector - 2 -.





- Carefully tilt the backrest fan - 1 - out of the backrest upholstery - arrow -.

Installation

Installation is reverse of removal, but note the following:

• The electrical wire faces to the side.

• The mounting eyelets on the fan housing face up and down.