Entry Assistance Trim

Entry Assistance Trim

• Removal and Installation can be done with the seat installed.

Special tools, testers and auxiliary items required

• Trim removal wedge (3409)

Removing





- Press the handle - 2 - - arrow - forward as far as the stop and hold it in that position.

- Remove the strap from the tab with a screwdriver.

- At the same time pry the trim - 1 - out of the handle upward using the trim removal wedge (3409) - arrows B -.

- Disengage the rear trim catch from the handle with bracket.

- Remove the trim from the handle and bracket as far as the length of the wire for the entry assistance button.

- Disconnect the connector - 1 - on the entry assistance button - 2 -.





- Remove the trim - 3 - with the entry assistance button.

- Remove the entry assistance button. Refer to => [ Entry Assistance Button ] Entry Assistance Button.

Installation

- Install the entry assistance button.

- Connect the connector to the entry assistance button.

• Ensure that electrical connections are pushed in as far as stop and engage with a click.

- First engage the rear trim catch in the handle with bracket.

- Make sure the trim engages correctly in the handle with bracket.