Bench Seat

Bench Seat

Removing





- Fold the front seat backrest forward as far as possible.

- Move the front seats forward as far as possible.

- Reach under the seat frame with both hands on one side of the seat.

- Pull the bench seat - 1 - up forcefully with both hands - A arrows - so the seat frame - 2 - on the bench seat disengage from the mounting - 3 -.

- Repeat the procedure on the other side of the bench seat - arrows B -.

- Vehicles with seat heating: disconnect the seat heating connector

- Remove the bench seat from vehicle.

Installation

Installation is reverse of removal, but note the following:

- Make sure the eyelets on the seat bench correctly fit around the connecting tube on the rear seat backrest frame.

- Press on the rear seat bench downward into the mount until it audibly engages.

• Make sure the seat heating electrical collections slide on and engage audibly.