Diagram 42/10 (Tracks 113-126)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Humidity sensor, Comfort system central control module, Automatic dimming interior rearview mirror





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G355 - Humidity sensor Automatic Day/Night Interior Mirror -Y7- with Rain/light Recognition Sensor -G397- Pass Compartment A/C Components

J393 - Comfort system central control module Control Modules in rear part of vehicle, overview

SC1 - Fuse 1 (on fuse panel C) Overview Of Fuses

ST2 - Fuse panel 2

T8c - 8-pin connector

T17f - 17-pin connector, brown Overview Of Connector Stations

T32c - 32-pin connector Locations

T46s - 46-pin connector Overview Of Connector Stations

Y7 - Automatic dimming interior rearview mirror Overview of Control Modules in interior of vehicle

(277) - Ground connection 3 (in interior wiring harness)

(639) - Ground connection on left A-pillar Locations

(B398) - Comfort system CAN bus high connection 2 (in main wiring harness)

(B401) - Comfort system CAN bus high connection 5 (in main wiring harness)

(B407) - Comfort system CAN bus low connection 2 (in main wiring harness)

(B410) - Comfort system CAN bus low connection 5 (in main wiring harness)

(B528) - LIN bus connection 1 (in main wiring harness)

* - Refer to applicable wiring diagram

*2 - From May 2009

*3 - Refer to applicable wiring diagram for fuse positions

Previous Diagram 42/9 (Tracks 99-112)