Entry Lamps (W31)/(W32) and Door Warning Lamps (W30)/(W36)

Entry Lamps (W31)/(W32) and Door Warning Lamps (W30)/(W36)

Removing






- Press the retaining tab - 1 - in using a flat head screwdriver and pry the door warning lamp or entry lamp - 2 - out.

- Disconnect the electrical connector - 3 -.

- Release the retaining clips - arrows - if applicable and remove the cover - 1 - over the bulb.






- Remove the bulb - 1 - on the rear side of the door warning lamp or entry lamp from the socket - 2 -.






Installing

Install in reverse order of removal, observing the following:

- Install the cover to the door warning lamp, if equipped.

- Insert the door warning lamp or entry lamp into the opening and engage it on the opposite side.