High-Intensity Gas Discharge Lamp Control Module (J343)/(J344)

High-intensity Gas Discharge Lamp Control Module (J343)/(J344)

Danger to life due to high voltage.

• Always disconnect the battery wire strap before working on gas-discharge headlamp components marked with yellow high-voltage symbols.

Removing






- Remove headlamp housings, refer to => [ Headlamp Housing ] Headlamp Housing.

- Remove the bolts - arrows -.

- Remove the control module - 1 - from the headlamp housing.

- Disconnect the adapter cable - 2 - and connector - 4 -.

- Remove the control module.

Installing

• Tightening specification, refer to => [ HID Headlamps Overview, from MY 2012 ] HID Headlamps Overview, From MY 2012.

Install in reverse order of removal. Note the following:

- Make sure the seal - 3 - between the control module and the headlamp housing is not damaged.

- Install the headlamp housing, refer to => [ Headlamp Housing ] Headlamp Housing.