Front Turn Signal Lamp Bulbs (M5)/(M7)

Front Turn Signal Lamp Bulbs (M5)/(M7)

Removing






- Remove the headlamp. Refer to => [ Headlamp Housing ] Headlamp Housing.

- Remove the high beam housing cover - 1 - from the headlamp - arrow -.

- Turn the bulb - 1 - counterclockwise - arrow - and remove it from the headlamp.






- Release the spring - 3 - and disconnect the electrical connector - 2 - from the bulb.

Installing

Install in reverse order of removal, observing the following:

- Install the new bulb into the headlamp without touching the bulb with bare hands.

- Close the housing cover - 1 -. When doing this, the strap - 2 - must align with the mark - 3 - on the headlamp.






- Install the headlamp. Refer to => [ Headlamp Housing ] Headlamp Housing.