Radiator Cooling Fan Control Module: Service and Repair

Coolant Fan Control Module (J293)

Removing

• When installing, bring all cable ties back to same positions.

- Remove the noise insulation.

- Remove the coolant fan electrical connector - 1 - from the bracket and disconnect it by sliding the retainer back - arrow - and pressing the release down.






- Free up the electrical wiring harness to the coolant fan control module.

- Disconnect the connectors - 2 and 3 -.






- Remove the bolt - arrow - and the coolant fan control module - 1 -.

Installing

Install in reverse order of removal. Note the following:

• Tightening specifications, refer to => [ Radiator and Coolant Fan Overview ] Radiator and Coolant Fan Overview.

- Install the front noise insulation.