Flush-Bonded Windows

Flush-Bonded Windows

Special tools, testers and auxiliary items required

• Removal Kit For Flush Bonded Windows (V.A.G1474B)

• Cutting Tools For Glass (V.A.G 1351)

• Pull Handle (V.A.G 1351/1)

• Suction Lifter (V.A.G 1344)

• Window Cutter (V.A.G 1561A)

• Universal Blade (V.A.G 1561/11)

• Scraper (V.A.G 1561/7+8)

• Double Cartridge Gun (VAS 5237)

• Cartridge Gun (V.A.G 1628)

• Cartridge Heater (V.A.G 1939A)

Adhesive Sealant, Removing from Window

Using adhesive remover (D 002 000 10) is recommended. Always follow the safety precautions when using adhesive remover.

When cleaning from vehicle interior out, the window just installed must not be pressed outward.

Paint surfaces

- Clean the painted surface with a dry cloth. Clean off any dirt with adhesive remover (D 002 000 10).

Plastic trim

- Allow the adhesive sealant to harden (approximately 1 hour) and then peel it off.