Rear Bumper Cover Assembly Overview

Rear Bumper Cover Assembly Overview






1 Decorative Trim Strip

• Audi S5 only

• Removing and Installing, refer to => [ Trim Molding, Audi S5 ] Trim Molding, Audi S5

2 Bolt

• Qty. 9

• 1.5 Nm

3 Bumper Cover Lower Section

• Removing and Installing, refer to => [ Bumper Cover Lower Section ] Bumper Cover Lower Section

4 Bolt

• Qty. 2

• 1.5 Nm

5 Rear Bumper Cover

• Removing and Installing => [ Rear Bumper Cover ] Rear Bumper Cover

6 Left Rear Parking Aid Sensor (G203)

• Removing and Installing, refer to

7 Bolt

• Qty. 3

• Tightening sequence, refer to => [ Side Mount and Bumper Cover Locking Mechanism
- Tightening Specifications and Sequence ]

8 Side Mount

• for the bumper cover

• Removing and Installing, refer to => [ Bumper Cover Side Mount ] Bumper Cover Side Mount

9 Clip Nut

• Qty. 3

10 Bumper Cover Locking Mechanism

• Clamping screw tightening specification 2.5 Nm

• Removing and Installing, refer to => [ Bumper Cover Locking Mechanism ] Bumper Cover Locking Mechanism

11 Clip Nut

• Qty. 2

12 Bolt

• Qty. 2

• Tightening sequence, refer to => [ Side Mount and Bumper Cover Locking Mechanism
- Tightening Specifications and Sequence ]

13 Nut

• 4 Nm

14 Left Rear Center Parking Aid Sensor (G204)

•

15 Right Rear Center Parking Aid Sensor (G205)

•

16 Nut

• 4 Nm

17 Right Rear Parking Aid Sensor (G206)

•

18 Cover

• For the towing eye

19 Bolt

• Qty. 3

• 1.5 Nm

Side Mount and Bumper Cover Locking Mechanism - Tightening Specifications and Sequence





- Tighten the bolts in a - 1 to 5 - sequence to 1.5 Nm.