Fenders Assembly Overview

Fenders Assembly Overview






1 Fenders

• Removing

- Remove front bumper. Refer to => [ Front Bumper Cover ] Front Bumper Cover.

- Remove wheel housing liner. Refer to => [ Front Wheel Housing Liner ] Front Wheel Housing Liner.

- Remove end plate.

- Remove the bolts - 2 - and - 4 - and nuts - 7 - and the fender.

• Installing in reverse order

2 Bolt

• 10 Nm

3 Fender Flange

4 Bolt

• 8 Nm

5 Pop Rivet

6 Rear Bracket

• Riveted to the fender

7 Front Bracket

• Riveted to the fender

8 Nuts

• 4 Nm

Fender Brace





1 Brace

- The bumper is removed and press the wheel housing liner to the side in the area of the brace.

- Remove the nuts - 2 - to remove it.

2 Nut

• 8 Nm

• The brace is secured on the right side with bolts tightened to 10 Nm.

3 Longitudinal Member

4 Fenders

5 Bumper Cover Mount

6 Nut

• 4 Nm

Fender Seal





1 Seal

• Self-adhesive.

• Remove the protective film and slide the seal onto the fender mounting flange under the wheel housing liner as illustrated.

2 Fender Flange

• Slide the seal onto the fender flange between the wheel housing liner and the inside of the fender.

3 Fenders

4 Wheel Housing Liner

End plate, removing and installing





1 Fenders

2 End Plate

- Remove front wheel.

- Remove the rear part from the wheel housing liner. Refer to => [ Front Wheel Housing Liner ] Front Wheel Housing Liner.

• Loosen the windshield washer fluid reservoir on the left side.

- Remove the bolts - 3 -, unclip from the fender rear bracket => [ (Item 6) Rear Bracket ] and slide the end plate down and out.

3 Screws

• 1.5 Nm.

4 Clip

• Qty. 2