Right Mounting Pin, Variable Convertible Top Compartment Enclosure

Right Mounting Pin, Variable Convertible Top Compartment Enclosure

Removing





• The right bracket for the variable convertible top compartment enclosure is shown in the illustration without the luggage compartment trim panel.

- Press the variable convertible top compartment enclosure trim - 5 - upward until it engages.

- Remove the screws - 1, 3 and 4 -.

- Remove the bracket - 2 - from the trim - arrow -.

Installation

Installation is reverse of removal, but note the following:

- Make sure the centering pins on the bracket fit into the holes in the body.

Tightening specifications, refer to => [ Variable Convertible Top Compartment Enclosure Assembly Overview ] Variable Convertible Top Compartment Enclosure Assembly Overview.