Manual Standard Front Seats Assembly Overview

Manual Standard Front Seats Assembly Overview

• The overview is based on the driver seat. The passenger seat is similar and the components are installed reversed from left to right.

• The illustration does not show the floor covering.





1 Connector station

• Connector routing, refer to => [ Connector Station Connectors ] Connector Station Connectors

2 Cover

• For the connector station

• Removing and Installing, refer to => [ Connectors, Disconnecting and Connecting ] Connectors, Disconnecting and Connecting

3 Electrical connection

• With a corrugated tube for the modular wiring routing

• Modular wiring routing, assembly overview, refer to => [ Modular Wiring Routing Assembly Overview ] Modular Wiring Routing Assembly Overview

• Modular wiring routing with corrugated pipe on front seat, refer to => [ Modular Wiring Routing with Corrugated Tube on Front Seat ] Modular Wiring Routing with Corrugated Tube on Front Seat

4 Storage compartment

• Special equipment

• Removing and Installing, refer to => [ Storage Compartment ] Storage Compartment

5 Seat forward/back adjuster

• Seat forward/back adjustment handle, removing and installing, refer to => [ Seat Forward/Back Adjustment Handle ] Seat Forward/Back Adjustment Handle

• Seat forward/back adjuster release cable, removing and installing, refer to => [ Seat Forward/Back Adjuster Release Cable ] Seat Forward/Back Adjuster Release Cable

6 Spindle cover

• Quantity: 2

• clipped to the seat forward/back adjustment spindle

• Removing and Installing, refer to => [ Seat Rail Spindle Cover ] Seat Rail Spindle Cover

7 LATCH child seat anchor

• Special equipment

• For the front passenger seat only

• Removing and Installing, refer to => [ LATCH Child Seat Anchor ] LATCH Child Seat Anchor

• check after accident, refer to => [ Child Seat Anchorages, Checking after an Accident ]

8 Belt latch

• Removing and Installing, refer to => [ Front Belt Latch ] Front Belt Latch

9 Tunnel side trim

• Removing and Installing, refer to => [ Trim, Tunnel Side ] Trim, Tunnel Side

10 Manual standard front seats

• Removing and Installing, refer to => [ Manual Standard Front Seats ] Manual Standard Front Seats

Optional equipment:

• Seat and backrest heating

11 Headrest

• Manual

• Removing and Installing, refer to => [ Headrests with Locking Mechanism ] Headrests with Locking Mechanism

12 Entry assistance, backrest release

• Assembly overview, refer to => [ Entry Assist Backrest Release Assembly Overview ] Entry Assist Backrest Release Assembly Overview

• Removing and Installing, refer to => [ Entry Assistance Handle with Bracket ] Entry Assistance Handle with Bracket

13 Backrest adjustment wheel

• Removing and Installing, refer to => [ Backrest Adjustment Wheel ] Backrest Adjustment Wheel

14 Cover

• only behind on the seat rail, sill side

• Removing and Installing, refer to => [ Seat Rail Cap ] Seat Rail Cap

15 Screws

• Quantity: 4

• 50 Nm

16 Cover

• For the seat rail

• Quantity: 4

• Removing and Installing, refer to => [ Seat Rail Cover ] Seat Rail Cover

17 Seat height adjustment unit

• Removing and Installing, refer to => [ Seat Height Adjustment Unit ] Seat Height Adjustment Unit

18 Actuator

• For the lumbar support

• Lumbar Support Adjustment Switch, Removing and Installing, refer to => [ Lumbar Support Adjustment Switch ] Lumbar Support Adjustment Switch

• Four-way lumbar support, removing and installing, refer to => [ Four-Way Lumbar Support ] Four-Way Lumbar Support

19 Sill side trim panel

• Removing and Installing, refer to => [ Trim, Sill Side ] Trim, Sill Side