HID Headlamps Overview, From MY 2012
HID Headlamps Overview, from MY 2012
Observe notes on contact corrosion. Refer to => [ Contact Corrosion ] Service Precautions.
• Headlamps must be adjusted after performing measures that could influence headlamp adjustment. Refer to => [ HID Headlamp, Adjusting ] HID Headlamp, Adjusting.
Part 1 - Headlamp Housing, Bulbs, Control Modules
1 Screw
• 1.5 Nm
• Quantity: 3
2 Daytime Running Lamp and Parking Lamp Control Module
• Left daytime running lamp and parking lamp control module (J860) , right daytime running lamp and parking lamp control module (J861)
• Removing and installing, refer to => [ Daytime Running Lamp and Parking Lamp Control Module (J860)/(J861) ] Daytime Running Lamp and Parking Lamp Control Module (J860)/(J861).
3 Sealing Frame
• Removing and installing, refer to => [ Sealing Frame ] Sealing Frame.
4 Ventilation
• For headlamp housing.
5 Interior Bracket For The Headlamp Housing
• Removing and installing, refer to => [ Inner Headlamp Housing Bracket ] Inner Headlamp Housing Bracket.
6 Screw
• 4.5 Nm
7 Screw
• 6 Nm
• Quantity: 2
8 Screw
• 1.5 Nm
• Quantity: 3
9 HID Headlamp Control Module
• Left High-intensity Gas Discharge Lamp Control Module (J343) and Right High-intensity Gas Discharge Lamp Control Module (J344)
• Removing and installing, refer to => [ High-intensity Gas Discharge Lamp Control Module (J343)/ ] High-Intensity Gas Discharge Lamp Control Module (J343)/(J344).
10 Front Turn Signal Lamp
• Left front turn signal bulb (M5) , right front turn signal bulb (M7)
• 12 V, 24 W (F024MD)
• Bulb, replacing, refer to => [ Front Turn Signal Lamp Bulbs (M5)/(M7) ] Front Turn Signal Lamp Bulbs (M5)/(M7).
11 Housing Cover
12 Screw
• 1.5 Nm
• Quantity: 3
13 Headlamp Power Output Stages
• Only for vehicles with cornering lamps.
• Left Headlamp Power Output Stage (J667) or Right Headlamp Power Output Stage (J668)
• Removing and installing, refer to => [ Headlamp Power Output Stage (J667)/(J668) ] Headlamp Power Output Stage (J667)/(J668).
14 Stationary Cornering Lamp Bulb
• Left stationary cornering lamp (M51) , right stationary cornering lamp (M52)
• 12 V, 55 W (H7)
• Bulb, replacing, refer to => [ Static Cornering Lamp Bulb (M51)/(M52) ] Static Cornering Lamp Bulb (M51)/(M52).
15 Impact Screw
• For aligning headlamp housing to contour of chassis.
• Must rest against lock carrier.
16 Screw
• 4.5 Nm
17 Upper Bracket For The Headlamp Housing
• Removing and installing, refer to => [ Upper Headlamp Housing Bracket ] Upper Headlamp Housing Bracket.
18 Screw
• 4.5 Nm
19 Speed Nut
20 Housing Cover
21 Gas-Discharge Lamp
• With integrated ignition coil
• Left HID headlamp bulb (L13) , right HID headlamp bulb (L14)
• 42 V, 35 W (D3S)
• Bulb, replacing, refer to => [ HID Headlamp Bulbs (L13)/(L14) ] HID Headlamp Bulbs (L13)/(L14).
22 Screw
• 4.5 Nm
23 Adjusting Element
• For adjusting the headlamp housing to the bumper contour.
24 Headlamp Housing
• With left LED parking lamp/DRL module (L176) , right LED parking lamp/DRL module (L177).
• Front side marker lamp bulb (M33) / (M34) depending on the country. Cannot be replaced separately.
• Removing and installing, refer to => [ Headlamp Housing ] Headlamp Housing.
Part 2 - Repair Kit
1 Headlamp Housing
• Removing and installing, refer to => [ Headlamp Housing ] Headlamp Housing.
2 Headlamp Beam Adjustment Motor
• Left Headlamp Beam Adjustment Motor (V48) and Right Headlamp Beam Adjustment Motor (V49).
• Removing and installing, refer to => [ Headlamp Range Control Positioning Motor (V48)/(V49), from MY 2012 ] Headlamp Range Control Positioning Motor (V48)/(V49), From MY 2012.
3 Grommet
• The headlamp housing must be opened to replace the positioning motor.
• A grommet can be ordered to seal the assembly opening. Refer to Electronic Parts Catalog (ETKA).
• Removing and installing, refer to => [ Headlamp Range Control Positioning Motor (V48)/(V49), from MY 2012 ] Headlamp Range Control Positioning Motor (V48)/(V49), From MY 2012.
4 Screw
• 1.4 Nm
• Quantity: 2