Upper Headlamp Housing Mount, From MY 2012

Upper Headlamp Housing Mount, from MY 2012

Removing






- Left: Free up the wiring harness - 6 -.

- Remove the rear hood latch cable - 5 - from the coupling.

- Remove the bolts - 1, 3 and 4 -.

- Remove the mount - 2 - toward the rear.

Installing

• Tightening specification, refer to => [ Headlamp Housing Bracket and Mount Overview, from MY 2012 ] Headlamp Housing Bracket and Mount Overview, From MY 2012.

Install in reverse order of removal. Note the following:

- Install the rear cable for the hood latch on the coupling.