Input Shaft, Output Shaft, Reverse Drive Gear and Shift Rails/Shift Forks Assembly Overview

Input Shaft, Output Shaft, Reverse Drive Gear and Shift Rails/Shift Forks Assembly Overview






1 Transmission Housing

• With differential and pinion

2 Oil Collector Tray

• Clipped into the bearing bracket and the gearshift rail/shift fork for 3rd and 4th gears

3 Input and Output Shafts with Shift Fork Group

• Disassembling and assembling, refer to => [ Shift Fork Group, Input Shaft, 1st, 2nd and Reverse Gear Output Shafts Assembly Overview ] Shift Fork Group, Input Shaft, 1st, 2nd and Reverse Gear Output Shafts Assembly Overview

4 Reverse Drive Gear

• With support/reverse shaft

• Reverse drive gear assembly overview

5 Magnet

• Clean

Reverse Drive Gear Assembly Overview





1. Thrust washer

2. Needle bearing

3. Reverse drive gear

Installed position: The shoulder - arrow - faces the transmission housing.

4 Reverse shaft support