Sedan without Sunroof
Roof Reinforcement Installing on Body
Sedan without sunroof
Special tools, testers and auxiliary items required
• AK adhesive (D 190 MKD A3)
Removing
- Remove headliner. Refer to => [ Headliner ] Headliner.
- Carefully pull roof reinforcement - 1 - away from body roof beginning at rear.
• The - arrow - points to the direction of travel.
• If the roof reinforcement is damaged during removal, such as with tears or kinks, it must be replaced.
Installing old roof reinforcement
- Apply new adhesive between adhesive beads - 2 -.
- Apply new adhesive near peripheral adhesive bead - 3 -.
Installing new roof reinforcement
- Apply new adhesive on adhesive beads - 2 -.
- Apply new adhesive on peripheral adhesive bead - 3 -.
All:
- Place roof reinforcement on body roof centered between sides.
- Push roof reinforcement from inside onto body roof.
- Install headliner. Refer to => [ Headliner ] Headliner.
• Ignore - 4 to 6 -.