Diagram 050/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Data Bus On Board Diagnostic Interface





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J285 - Instrument Cluster Control Module Locations

J428 - Distance Regulation Control Module Locations

J533 - Data Bus On Board Diagnostic Interface Overview of Control Modules

T16 - 16-Pin Connector, Diagnostic Connector

T17e - 17-Pin Connector, red, connector station A-pillar, left Overview of Connector Stations and Connectors

T26a - 26-Pin Connector, black, on data bus on board diagnostic interface

T32 - 32-Pin Connector, grey, on instrument cluster

T46b - 46-Pin Connector, right CAN separating connector

(B444) - OBD Connection 1 (in main wiring harness)

(B445) - OBD Connection 2 (in main wiring harness)

(C67) - CAN-Bus High Connection (in headlamp wiring harness)

(C68) - CAN-Bus Low Connection (in headlamp wiring harness)

- CAN-Bus (data wire)

* - Models with distance regulation

♦ - FOC - Fibre Optic Conductor => Wiring Diagram Infotainment-Data Bus (Most-Ring)

Previous Diagram 050/2 (Tracks 1-14)

Next Diagram 050/4 (Tracks 29-42)