Camshaft Position Sensor: Service and Repair

Camshaft Position Sensors (G40)/(G163)

Removing

- Remove the front engine cover - 1 - upward.






- Disconnect the connector - 1 -.






- Remove the bolt - arrow - and remove the camshaft position sensor (G40) (right side).

- Disconnect the connector - 1 -.






- Remove the bolt - arrow - and remove the camshaft position sensor 2 (G163) (left side).

Installing

• Tightening specifications, refer to => [ High Pressure Pump Overview ] High Pressure Pump Overview, => [ Ignition Overview ] Ignition Overview.

Installation is performed in reverse order of removal, noting the following:

• Replace O-rings.