Handle Recess

Handle Recess

Removing





- Remove rear lid trim. Refer to => [ Rear Lid Trim ] Rear Lid Trim.

- Remove spring nuts - arrows -.

- Remove handle recess - 1 - from trim.

Installation





Installation is reverse of removal, but note the following:

- Insert handle recess - 1 - in rear lid trim.

- Place new spring nuts - 3 - on securing pins.

- Press on spring nuts with socket insert SW 7 - 2 - - arrow -.

- Install rear lid trim. Refer to => [ Rear Lid Trim ] Rear Lid Trim.

Tightening Specifications