Seat Height Adjustment Unit

Seat Height Adjustment Unit

Special tools, testers and auxiliary items required

• torque wrench (V.A.G 1410)

• Engine and transmission holder (VAS 6095)

• Fixture for seat repair (VAS 6136)

Removing

- Remove the seat. Refer to => [ Seat ] Seat.

- Mount the (VAS 6136) on the (VAS 6095).

- Attach the front seat to the (VAS 6136).

- Remove the seat pan. Refer to => [ Seat Pan ] Seat Pan.

- Remove the front backrest. Refer to => [ Backrest ] Backrest.

- Remove the bolt - 3 -.





- Remove screws - 2 - and - 4 -.

- Remove the seat height adjustment unit - 5 - and retaining plate - 1 -.

Installation

• Tightening specifications, refer to => [ Seat Height Adjustment Unit Assembly Overview ] Seat Height Adjustment Unit Assembly Overview.

To install, perform the steps used in removal in reverse order.