Coolant Fan

Coolant Fan

Removing

• During installation, all cable ties must be re-installed at the same location.

- Bring lock carrier into service position Radiator Support

- Remove fan shroud => [ Fan Shroud ] Service and Repair.

Coolant Fan (V7) (left):





- Remove bolts - arrows - and remove fan wheel.

- Remove bolts - arrows -.





- Unclip Coolant Fan Control (FC) Control Module (J293) - 1 - and remove coolant fan and coolant fan control module.

Coolant Fan 2 (V177) (right):





- Remove bolts - arrows -.

- Unclip Coolant Fan Control (FC) Control Module 2 (J671) - 1 - and remove coolant fan and coolant fan control module.

Installing

• Tightening Specifications => [ Radiator and Coolant Fan Assembly Overview ] Radiator and Coolant Fan Assembly Overview.

Installation is in reverse order of removal, note the following:

• Secure all hose connections using hose clamps appropriate for the model type.

• During installation, all cable ties must be re-installed at the same location.

- Install fan shroud => [ Fan Shroud ] Service and Repair.

- Install lock carrier with attachments