Low Beam Headlamps

Low Beam Headlamps

v

Removing

- Switch off ignition and remove ignition key.

- Turn light switch into "0" position.

Left Headlamp - Vehicles with 6-cyl. Engine

- Remove reservoir for power steering => [ Reservoir for Power Steering,
Loosening at Bracket ] Preparing to Work on Headlamps.

Right Headlamp - Vehicles with 6-cyl. Gasoline Engine

- Remove air filter housing => [ Air Filter Housing, Removing
- Vehicles with 6-Cylinder Gasoline Engine ] Preparing to Work on Headlamps.

Right Headlamp - Vehicles with 4.2L MPI Engine

- Remove air filter housing => [ Air Filter Housing, Removing
- Vehicles with 4.2L MPI Engine ] Preparing to Work on Headlamps.

Right Headlamp - Vehicles with 4.2L FSI Engine

- Remove air filter housing => [ Air Filter Housing, Removing
- Vehicles with 4.2L FSI Engine ] Preparing to Work on Headlamps.

All:

- Release securing guides - arrows - and remove headlamp housing cover.





- Disconnect electrical connector - 1 - at low beam bulb.





- Disengage wire clamp - 3 - and remove bulb - 2 - from housing.

Installing

Install in reverse order of removal, observing the following:

- Insert bulb in housing, taking care not to touch glass bulb with bare hands.

- Secure bulb with spring clip.

- Reconnect harness connector and close housing cover.