Diagram 116/11 (Tracks 127-140)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Intake Manifold Runner Position Sensor, Secondary Air Injection (AIR) Sensor 1, Control Valve Control Module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G336 - Intake Manifold Runner Position Sensor 3.0L CCAA Overview

G584 - Control Valve Position Sensor 3.0L CCAA Overview

G609 - Secondary Air Injection (AIR) Sensor 1 3.0L CCAA Overview

J623 - Engine Control Module (ECM) Overview of Control Modules

J808 - Control Valve Control Module 3.0L CCAA Overview

T14k - 14-Pin Connector, black, in engine compartment, Bank 1

T60 - 60-Pin Connector, black (Connector A), on engine control module (ECM)

T94 - 94-Pin Connector, black (Connector B), on engine control module (ECM)

V380 - Control Flap Adjustment Motor 3.0L CCAA Overview

(328) - Sensor Ground Connection 2 (in engine compartment wiring harness)

(D110) - Connection 8 (in engine compartment wiring harness)

(D141) - Connection (5V) (in engine pre-wiring wiring harness)

* - Only USA

Previous Diagram 116/10 (Tracks 113-126)

Next Diagram 116/12 (Tracks 141-154)