Reduced Oil Pressure Switch

Reduced Oil Pressure Switch

Special tools, testers and auxiliary items required

• Assembly Tool (T10118)

• Socket 24 mm and Jointed Extension (T40175)

Removing

- Remove the rear engine cover - 2 - upward.






- Disconnect the electrical connector - 2 - using the (T10118).






- Remove the reduced oil pressure switch (F378) - 1 - using a (T40175).

• The installation location is shown with the supercharger removed.

Installing

Install in reverse order of removal. Note the following:

• Tightening specifications, refer to => [ ] Service and Repair.

• Replace sealing ring.