Power Window Control Head

Power Window Control Head

Removing

- Switch off ignition and remove ignition key.

- Remove front door trim.

- Disconnect the power window control head in driver door (E512) connector.

- Release catches - 2 - on armrest side by pressing on retaining element - arrows -.





- Pull power window control head in driver door - 1 - downward out of door trim.

• If it is difficult to remove the power window control head in driver door as described, remove the armrest.

Installing

Install in reverse order of removal, observing the following:

- Press power window control head in driver door into switch mount until catches engage.

- Install front door trim.