Lane Change Assistance, Preparing for Calibration

Lane Change Assistance, Preparing for Calibration





1 Spacing Laser (VAS 6350/2)

• For distance measurement

• Usage => operating instructions

2 Calibration Tool (VAS 6350)

3 Water Level

• on calibration tool (VAS 6350)

• to check horizontal position of calibration tool (VAS 6350)

4 Catch Bracket

• For mounting spacing laser (VAS 6350/2) For distance measurement

• Distance to wheel center sensors (VAS 6350/1) on rear wheels: Dimension - a - = 1700 ± 2 mm.

5 Wheel Center Sensor (VAS 6350/1)

• With wheel bolt adapter SW 16 and measuring paddle

6 Brand Emblem

• The laser point is aligned on the center of the brand emblem

7 Calibration Tool for Lane Changing Assist (VAS 6350/4)

• Is moved from right to left side of measuring field during calibration

• When installed correctly, vehicle electrical system voltage line must be connected at bottom left of calibration device (as seen in direction of travel)

8 Measurement Scale

• For positioning calibration tool for lane changing assist (VAS 6350/4)

9 Line Laser (VAS 6350/3)

• With laser eye protection

• On calibration device (VAS 6350)

• Switching on and off => operating instructions

10 Plastic Foot

• Quantity: 3

• Adjustable in order to adjust horizontal position of calibration tool (VAS 6350)