Hood Cable

Hood Cable






1 - Hood cable

• Removing:

• Removing storage compartment on driver side.

• Remove cable from lower part of hood lock disengage and lifting eyelets.

• Installing:

• Install in reverse order of removal.

• Bring ball on cable for lower part of hood lock into installation position.

2 - Actuating lever

3 - Grommet

• Check for proper grommet seating when installing.

4 - Seal

• Pressed into fender flange hole

5 - Fender

6 - Lower part of hood lock

• Removing and installing => [ Lower Part of Hood Lock ] Hood

• Can be used to adjust height of hood.