Rear Fender: Service and Repair

Rear Wheel Housing Trim





1 Wheel Housing Trim

• Removing

- Remove the upper B-pillar trim. Refer to => [ Upper B-Pillar Trim ] Upper B-Pillar Trim

- Remove lower B-pillar trim. Refer to => [ Lower B-Pillar Trim ] Lower B-Pillar Trim.

- Disengage rear bench seat on the side to be removed. Refer to => [ Bench Seat ] Bench Seat.

Vehicles with fixed rear seat backrests

- Remove rear seat backrest. Refer to => [ Fixed Rear Seat Backrest ] Fixed Rear Seat Backrest.

Vehicles with foldable rear seat backrests

- Remove side upholstery. Refer to => [ Rear Seat Side Upholstery ] Rear Seat Side Upholstery.

Procedure for all vehicles

- Unclip wheel housing trim - 1 -.

- To do this, push wheel housing trim - 1 - in wheel liner area towards vehicle interior.

- Push wheel housing trim - 1 - up in access area.

- Remove wheel housing trim - 1 - forward.

• Installing

- Check clamps - 2 - (quantity: 3) for damage and deformity.

Replace damaged or deformed clamps.

- Before installing wheel housing trim - 1 -, make sure clamps - 2 - (quantity: 3) are positioned correctly.

- Beginning at bottom, clip in wheel housing trim - 1 - with clamps - 2 - (quantity: 3).

Ensure wheel housing trim - 1 - is held securely.

Vehicles with foldable rear seat backrests

- Install side upholstery. Refer to => [ Rear Seat Side Upholstery ] Rear Seat Side Upholstery.

Vehicles with fixed rear seat backrests

- Install rear seat backrest. Refer to => [ Fixed Rear Seat Backrest ] Fixed Rear Seat Backrest.

Procedure for all vehicles

- Engage the rear bench seat at removed side. Refer to => [ Bench Seat ] Bench Seat.

- Install lower B-pillar trim. Refer to => [ Lower B-Pillar Trim ] Lower B-Pillar Trim.

- Install the upper B-pillar trim. Refer to => [ Upper B-Pillar Trim ] Upper B-Pillar Trim

- Install door seal lip over wheel housing trim - 1 -.

2 Clamps

Quantity: 3

• Replace if damaged or deformed

3 Support Piece

4 Floor Covering