Backrest Cover

Backrest Cover

Special tools, testers and auxiliary items required

• Pry lever (80 - 200)





1 Right Backrest Cover

• Removing and installing, refer to => [ Backrest Cover, Removing and Installing ]

2 Left Backrest Cover

• Removing and installing, refer to => [ Backrest Cover, Removing and Installing ]

3 Retaining Clip

4 Bolt

• 2.5 Nm

• Replace with locking compound

5 Outer Part of Belt Guide

• Removing and installing, refer to => [ Outer part of belt guide, removing and installing ]

6 Inner Part of Belt Guide

• To remove, remove backrest cover. Refer to => [ Backrest Cover and Upholstery ] Backrest Cover and Upholstery

7 Backrest Frame

Backrest Cover, Removing and Installing





- Affix backrest panel all around trim - 1 - using adhesive tape - 2 -.

- Using (80-200), pry off upper backrest cover at inner side, starting from backrest panel.

- Disengage clip at front corner of backrest panel extremely carefully.

Outer part of belt guide, removing and installing





- Carefully guide (80-200) between backrest cover and outer part of belt guide.

- Carefully press to disengage outer part of belt guide from inner part.