Engine, Securing to Engine and Transmission Holder

Engine, Securing to Engine and Transmission Holder

Special tools, testers and auxiliary items required

• Lifting Tackle (2024 A)

• Engine and Transmission Holder (VAS 6095) with Bracket (VAS 6095/1-5)

• Shop Crane (VAS 6100)

• Lift Arm Extension for Workshop Crane (VAS 6101)

Procedure

• Engine separated from transmission. Refer to => [ Engine and Multitronic Transmission, Separating ] Engine and Multitronic Transmission, Separating.

- Attach the (2024 A) to the engine and to the (VAS 6100) using the (VAS 6101) as illustrated.





• To be aligned to the center of gravity of the engine assembly, the hole rails of the lifting hook must be inserted as shown in the illustration.

CAUTION!
Risk of accident due to loose engine sling components.

• Use securing pins - arrows - to secure the lifting hooks and alignment pins.

- Disconnect the electrical connector - 1 - on the Left Electro-Hydraulic Engine Mount Solenoid Valve (N144).





- Remove the bolts - arrows - and then remove the engine support.

• The illustration shows the installation location without the engine bearing console.

- Repeat work procedure on opposite side of the engine.

- Secure the engine with the bracket (VAS 6095/1-5) to 40 Nm on the (VAS 6095) as illustrated.