Door Safety and Entry Lamp

Door Safety and Entry Lamp

Removing

- Press in catch - 1 - using a flat screwdriver and pry out door safety lamp or door entry lamp - 2 -.





- Disconnect electrical connector - 3 -.

- If present, release clips - arrows - and pull cover - 1 - off above light bulb.





- Remove bulb - 1 - (12V, 3 W) on back of door safety light/entry light from socket - 2 -.





Installing

Install in reverse order of removal, observing the following:

- If present, install cover on door safety lamp.

- Insert door safety lamp or access lamp into opening and engage on opposite side.