Front Side Marker Lamp Bulbs

Front Side Marker Lamp Bulbs

Removing

- Switch off ignition and remove ignition key.

- Turn light switch into 0 position.

- Loosen the fasteners - 1 and 2 - - arrow - and remove the noise insulation, if equipped.





- Remove the lamp socket - 1 - from the side marker lamp housing.





- Remove bulb from the socket.

Installing

Install in reverse order of removal, observing the following:

- Insert the new bulb (12V, 5 W - orange) into the housing without touching the glass bulb with bare hands.

- When inserting, make sure markings - 2 - and - 3 - are horizontal.