Ribbed Belt Drive Assembly Overview

Ribbed Belt Drive Assembly Overview





1 Ribbed Belt

• Check for wear

• Removing and installing, refer to => [ Ribbed Belt ] Ribbed Belt

• When installing, make sure it is seated correctly on the ribbed belt pulleys

2 Bolt

• Replace

• 20 Nm plus an additional 90° turn

3 Bolt

• 22 Nm

4 Generator

5 Cap for Idler Pulley

6 Idler Roller for Ribbed Belt

• 40 Nm

7 Bolt

• Tightening specifications, refer to => [ Coolant Pump, Coolant Thermostat and Connecting Piece Assembly Overview ] Coolant Pump, Coolant Thermostat and Connecting Piece Assembly Overview

8 Ribbed Belt Pulley for Coolant Pump

• Removing and installing, refer to => [ Coolant Pump ] Coolant Pump

9 Bolt

• Tightening specifications, refer to => [ Coolant Pump, Coolant Thermostat and Connecting Piece Assembly Overview ] Coolant Pump, Coolant Thermostat and Connecting Piece Assembly Overview

10 Coolant Pump

• Removing and installing, refer to => [ Coolant Pump ] Coolant Pump

11 Cap for Tensioning Element

12 Tensioning Element for Ribbed Belt

• Removing and installing, refer to => [ Ribbed Belt Tensioner ] Service and Repair

• 40 Nm

13 Bolt

14 Bolt

15 Power Steering Pump Bracket

16 Bolt

17 Power Steering Pump

18 Bolt

19 Power Steering Pump Ribbed Belt Pulley

20 Bolt

• 20 Nm

21 Bolt

22 A/C Compressor

• Do not remove or disconnect refrigerant lines

• Be careful of the alignment sleeves - 23 - when installing

23 Alignment Sleeves

• 2 pieces

24 Bracket for Air Conditioning Compressor

• Be careful of the alignment sleeves - 23 - when installing

25 Vibration Damper

• With ribbed belt pulley

• various versions. Sequence

• Removing and installing, refer to => [ Vibration Damper ] Vibration Damper

Sealing Flange, Belt Pulley Side, Tightening Specification





- Tighten the bolts - arrows - in a diagonal sequence in stages to 9 Nm.