Diagram 117/18 (Tracks 225-238)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Heated Oxygen Sensor (HO2S), Heated Oxygen Sensor (HO2S) 2, Clutch Pedal Starter Interlock Switch





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F194 - Clutch Pedal Starter Interlock Switch Locations

G39 - Heated Oxygen Sensor (HO2S) Locations

G108 - Heated Oxygen Sensor (HO2S) 2 Locations

J217 - Transmission Control Module (TCM) Overview of Control Modules

J518 - Access/Start Control Module Overview of Control Modules

J587 - Selector Lever Sensor Control Module Selector Mechanism Overview

J623 - Engine Control Module (ECM) Overview of Control Modules

SA6 - Fuse 6 (on fuse panel A) Overview of Fuses

T6a - 6-Pin Connector, black, heated oxygen sensor (HO2S)

T6b - 6-Pin Connector, black, heated oxygen sensor (HO2S) 2

T10p - 10-Pin Connector, black, on selector lever sensor control module

T17c - 17-Pin Connector, white, connector station electronics box in left plenum chamber Overview of Connector Stations and Connectors

T20h - 20-Pin Connector, black (Connector A), on access/start control module

T94 - 94-Pin Connector, black (Connector B), on engine control module (ECM)

Z19 - Oxygen Sensor (O2S) Heater

Z28 - Oxygen Sensor (O2S) Heater 2

(44) - Ground Connection (on left lower A-pillar) Overview of Ground Connections in Interior of Vehicle

(367) - Ground Connection 2 (in main wiring harness)

(D109) - Connection 7 (in engine compartment wiring harness)

(E26) - Connection (selector lever P/N) (in Motronic wiring harness)

* - Models with manual transmission

** - => Wiring Diagram Automatic Transmission

Previous Diagram 117/17 (Tracks 211-224)

Next Diagram 117/19 (Tracks 239-252)