Diagram 117/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Battery, Battery Monitoring Control Module, Safety Fuses





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

A - Battery

J234 - Airbag Control Module Overview of Control Modules

J367 - Battery Monitoring Control Module 3.2L CALA / BKH Overviews

J533 - Data Bus On Board Diagnostic Interface Overview of Control Modules

N253 - Battery Interrupt Igniter Overview of Relay Carrier

S131 - Safety Fuse 1 Overview of Fuses

S132 - Safety Fuse 2 Overview of Fuses

S133 - Safety Fuse 3 Overview of Fuses

T2au - Double Connector, purple, on battery interrupt igniter

T2bc - Double Connector, yellow, on battery monitoring control module

T20p - 20-Pin Connector, black, on data bus on board diagnostic interface

T100 - 100-Pin Connector, blue, on airbag control module

(13) - Ground Connection (in engine compartment, right) Overview of Ground Connections in Front Part of Vehicle

(18) - Ground Connection (on engine block) Overview of Ground Connections in Front Part of Vehicle

(624) - Ground Connection (near starter battery)

(B272) - Plus Connection (30) (in main wiring harness)

(B300) - Plus Connection 4 (30) (in main wiring harness)

(B301) - Plus Connection 5 (30) (in main wiring harness)

* - Main fuse panel, in right rear luggage compartment on battery

Next Diagram 117/3 (Tracks 15-28)