Front Treble Speakers (R20)/(V344)/(R22)/(V345)

Front Treble Speakers (R20)/(V344)/(R22)/(V345)

The left front treble speaker (R20) - 1 -/ right front treble speaker (R22) - 3 - are located in the instrument panel.






Removing and installing is identical.

The left front treble speaker motor (V344) / right front treble speaker motor (V345) are integrated in the left front treble speaker (R20) - 1 -/ right front treble speaker (R22). The speaker motors cannot be replaced separately.

- Turn off the ignition and all electrical consumers and remove the ignition key.

Removing

- Remove the side speaker trim..

- Remove the screws - 1 - from the left front treble speaker - 2 - and then pull the left front treble speaker - 2 - off its centering pins - 3 -.






- Unlock and disconnect the connectors from the left front treble speaker - 2 -.

Installing

- Install in reverse order of removal.

Component location overview for the tightening specification and installation instructions refer to => [ Speaker Location Overview, Bang & Olufsen(R) ] Speaker Location Overview, Bang & Olufsen(R).